Maxit Mag

Finally, the D4 was bolted into place like so.

 

 

 

With the pump looking good, it was time to fit the Dual Floppy Bay-reservoir.  This wasn't as straight forward as I had planned - there where 2 screw heads on the inside of the front of the Wavemaster which stopped it from mounting flush to the front. I had to attack the front of the Reservoir with my trusty dremil making 2 recesses for the screw heads to go into.   The two cutouts you can see on the pic below allow the reservoir to push up flush against the front of the case unhindered by the screw heads that protrude on the inside of the case.

 

 

 

With that little mod out of the way, the reservoir fitted like a glove.